CHERNE Test-Ball - General Safety and Usage Instructions (English)

5
I. GENERAL SAFETY & USAGE INSTRUCTIONS
1. DEATH, BODILY INJURY AND/OR PROPERTY DAMAGE MAY RESULT IF
PLUG FAILS FOR ANY REASON.
2. READ AND UNDERSTAND THIS SAFETY INSTRUCTION MANUAL BEFORE
USING PLUG.
3.
MUST WEAR SAFETY GLASSES AND A HARD HAT.
4.
DO NOT ENTER DANGER ZONE WHEN PLUG IS IN USE.
5.
MEASURE PIPE DIAMETER BEFORE SELECTING PLUG.
6.
INSPECT PLUG FOR DAMAGE BEFORE AND AFTER USE.
7.
NEVER USE A PLUG IN A PIPE SIZE DIFFERENT FROM RECOMMENDED
USAGE RANGE (REFER TO THIS SAFETY INSTRUCTION MANUAL).
8.
ALWAYS ATTACH AN INFLATION EXTENSION HOSE SO PLUG CAN BE
INFLATED AND DEFLATED FROM OUTSIDE THE DANGER ZONE.
9.
NEVER REMOVE THE INFLATION HOSE UNTIL ALL BACK PRESSURE IS
RELEASED AND THE PLUG IS DEFLATED.
10.
MUST INFLATE PLUG TO THE PRESSURE SHOWN ON PLUG.
11.
ALWAYS USE PROPERLY CALIBRATED PRESSURE GAUGES.
12.
DO NOT EXCEED RECOMMENDED MAXIMUM ALLOWABLE
BACK PRESSURE (REFER TO THIS SAFETY INSTRUCTION MANUAL).
13.
ALWAYS RELEASE BACK PRESSURE FROM THE PIPE FIRST, BEFORE
DEFLATING PLUG.
CALL 1-800-THE-PLUG OR 1-952-933-5501 IF ADDITIONAL CLARIFICATION IS
REQUIRED.
96C<:G
ODC:
CD