Cherry MultiBoard MY 7000 - Page 19

19
Send data
immediately after
card swipe
J 7 Y/N Y = all data is transmitted no matter the
tracks on the card differ from the tracks
enabled
N = The keyboard checks if data is read
from all tracks enabled. If a track is missed
no data is transmitted at all.
Y
Define track 1
header (& enable)
V 5 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here.
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 1
header
V 1 N N = disable N
Define track 1
terminator
(& enable)
W 5 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 1
terminator
W 1 N N = disable N
Define track 2
header (& enable)
V 6 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 2
header
V 2 N N = disable N
Define track 2
terminator
(& enable)
W 6 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 2
terminator
W 2 N N = disable N
Define track 3
header (& enable)
V 7 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 3
header
V 3 N N = disable N
Define track 3
terminator
(& enable)
W 7 [sequence] Enter
[num]
[sequence] = Enter the data you want
programmed here
Enter [num] = Hit the numeric keypad enter
key to end programming sequence.
not def.
Disable track 3
terminator
W 3 N N = disable N
Options Programming string
(by keystroke)
Comment Default
1st 2nd 3rd 4th