High and Low Speed Feature
Move the wiper/washer control lever
to the first detent position (LO speed)
past the AUTO setting for low speed
operation, or to the second detent po-
sition (HI speed) for high speed wiper
operation.
Mist Feature
Move the wiper/washer control lever
to the MIST position to activate a
single wipe cycle to clear the wind-
shield. The wiper will continue to op-
erate until you release the wiper/
washer control lever.
Auto Wiper Feature (If Equipped)
Rotate the MODE switch of the wiper/
washer control lever to the AUTO posi-
tion to activate the auto wiper feature.
The wiper will function automatically
when it is raining. Rotate the Mode
switch upward to increase the wipe
speed, rotate the Mode switch down-
ward to decrease the wipe speed.
Wiper High and Low Speed Control Mist Control Auto Control
FEATURES OF YOUR VEHICLE – 37
Chery Automobile Co., Ltd.
To Next Page
Loading...
Need help?
General
