Chery SQR7240T - Page 125

Driving
To adjust inclination of seat backrest
Lean your body close to seat backrest. Then, pull seat backrest to adjust the handle. Adjust the backrest to a desirable angle through
alteration of body inclination.
To adjust the electric seat at driver‟s side ( )
There is a control plate outside the seat cushion of electric seat, which operates an electric seat to make 8-directional adjustment (to and
back as bi-directional, four operations in total); there are two control switches with exact functions below:
Switch 1: Used to adjust angle of inclination of seat backrest.
 Push upper end of switch forward or backward with your finger to cause seat backrest lean forward or backward.
Switch 2: Used to adjust your seat forward and backward and regulate rise and fall of the forepart and afterpart of seat cushion.
 Push the switch forward or backward to make your seat move forward or backward;
 Push front end of the switch upward or downward to make the forepart of seat cushion upward or downward;
 Push back end of the switch upward or downward to make the afterpart of seat cushion upward or downward;