EasyManua.ls Logo

Chery SQR7240T - Warning Flasher; Bulb Replacement

Chery SQR7240T
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emergency Response
Warning Flasher
The warning flasher is for emergency use
only to warn against vehicles in the front
and those following that your car drops
anchor or is in hazardous conditions.
Push the button to turn on or off it. When
ignition switch is turned off, the warning
flasher can be still operated.
Local operating function
The control system of the engine has local
operating function. It can still work even
the system has faults. However, engine
performance might be degraded.
Head to Chery chartered
maintenance point for
inspection immediately.
Prompt Fueling
If fuel gauge indicates low oil
level or the warning
indicator is ON, add fuel
immediately.
When fuel is at a low level, the low oil
level warning indicator will be ON. Please
head to the gas station nearest for fueling.
Unprompted fueling will
result in loss of ignition and
difficulty in startup, possibly
incurring damages to the engine.
Turn to Chery chartered
maintenance point for emergency
services immediately.
Please correctly use compressor
gun for fueling.
Insert a compressor gun into the fuel
tank completely. Don’t lay it beside oil
filling port in a slanting way.
If an automatic compressor gun is
used for fueling, automatic shutoff of
the gun indicates that the fuel tank has
been fully filled. Don’t attempt to keep
on fueling at this time. Otherwise,
there will be no expansion space in the
fuel tank; once temperature rises, fuel
will spill over the fuel tank.
Screw down the fuel tank cup after
fueling, please.
Please comply with local pertinent
laws & regulations when canned
standby fuel is carried along with your
car.
For the purpose of safety, it is
suggested that canned standby fuel be
not carried along with the car to avoid
that the oil cans are damaged to spill
gasoline and result in fire disasters.
Bulb Replacement
Prior to replacement of any bulb, turn off
the light and turn off ignition switch, and
dismount anode of accumulator cell.

Table of Contents

Related product manuals