Driving
Gear display
The position of gearshift lever will be
displayed into central display panel when
ignition switch is turned on.
Each gear is displayed, as indicated below:
The position “P”:
The position “R”:
The position “N”:
The position “D”:
Manual mode:
In manual shift mode, the gear selected by
driver will be displayed in figures in the
display panel. Take gear 2 as an example
below.
Shift lock
To move the gearshift lever from the
position ―P‖ to ―R‖, from ―N‖ to ―R‖, or
from ―R‖ to ―P‖, push down the limit
button on the handle of gearshift lever to
release the shift lock. It is unnecessary for
the limit button to be pushed down for the
gearshift lever to move to other positions.
Note: The operating methods for the
vehicles equipped with two types of
automatic transmissions keep the same.
To Next Page
Loading...
