Driving
Seat belt warning indicator
This indicator should light up when ignition switch is turned on. The indicator will keep ON to prompt driver to wear seat belt.
Fasten seat belt
Pull the seat belt out steadily. If you operate too forcibly or the car is on a slope, the seat belt may be locked up. Seat belt should runs
through external shoulder center with the waist part tightly through the hip instead of stomach.
Insert clapper into buckle
until the click sound is heard.
Otherwise, seat belt fails to
be rightly locked up.
To release the seat belt, push down the red button on the buckle to draw it back.
Ensure that each seat belt uses a buckle rightly.
Please pull it with efforts and
then release it, if a seat belt
can‟t be pulled out. Then, the
seat belt will be able to be pulled out
smoothly.
To Next Page
Loading...
