Driving
Cruise Button Function
Definition
Cruise buttons ON and OFF to the left of
steering wheel are shown in the figure
below:
Cruise buttons RES/+ and SET/-to the left
of steering wheel and under the buttons
ON and OFF are shown in the figure
below:
1. Ignition switch is accessible through
ON button; push the ON button, cruise
indicator lights up and keeps blinking
(normal pre-cruise status); when
driving at 25km/h to 130km/h, push
the button SET/-, vehicle runs at a
constant speed (Don’t place foot on
accelerator pedal; cruise system
automatically adjusts the opening of
air throttle); at the same time, cruise
indicator constantly shines, suggesting
progress into cruise status; continued
blinking of cruise indicator suggests
non-realization of cruise status, please
try again to enter cruise status (if
failed, please contact with Chery
chartered service station and ask for
inspection & repair service);
2. In cruise status, push the OFF button
to exit from cruise status, and cruise
indicator blacks out; in cruise status,
step on accelerator pedal (cruise
indicator constantly shines), and car
speed rises; when accelerator pedal is
released, car speed falls to cruise
speed before accelerator pedal is
stepped on;
3. In cruise status, when accelerator
pedal (cruise indicator constantly
shines) is stepped on, car speed rises;
when accelerator pedal is released, car
speed automatically falls to the cruise
speed when accelerator pedal is not
stepped on;
4. In cruise status, step on accelerator
pedal (cruise indicator constantly
shines), and car speed rises; release
accelerator pedal, and push the SET/-
button, and the car cruises at new
speed;
To Next Page
Loading...
