• Rotate the applicable bulb and con-
nector and pull outward from the
assembly.
• Pull the bulb out of the socket and
replace the bulb.
• Reinsert the bulb and socket assem-
bly and rotate it to the lock position.
CAUTION!
Do not touch the new bulb with your
fingers. Oil contamination will severely
shorten bulb life.
Headlight Beam Adjustment
The correct headlight adjustment is
directly correlated to driving safety.
The headlights must be adjusted
properly using special instruments. Al-
ways follow legal guidelines when ad-
justing the headlights.
Front Fog Light Replacement
• To replace the front fog light bulb,
raise the vehicle and remove the
bulb from the back of the fog light.
Side Repeater Light Replacement
NOTE:
Side Repeater Lights are lo-
cated in both front fender panels.
• Push the side repeater to one side
to release the spring tension and pull
outward.
• T wist the socket one quarter turn and
pull the socket from the lens.
• Pull the bulb straight from the socket
and replace.
Taillight Assembly Bulb
Replacement
The taillight assembly contains the
following bulbs:
• Rear taillight
• Stop light
• Turn signal light
1 - High Beam Headlight / Low Beam
Headlight / Parking Light Bulb
2 - Front Turn Signal Bulb
Side Repeater Light Location
Side Repeater Bulb Removal
122 – PROPER MAINTENANCE OF YOUR VEHICLE
Chery Automobile Co., Ltd.
To Next Page
