• Backup light
• Open the back cargo door, loosen the
retaining clip of the taillight assem-
bly cover and remove the taillight as-
sembly.
• Remove the light socket from the tail-
light assembly.
• Push the bulb down with slight pres-
sure and rotate the bulb counter-
clockwise.
• Install in the reverse order.
•
V erify light operation after reassembly .
Center High-Mounted Stop Light
Replacement
• Open the back cargo door and re-
move the center high-mounted stop
light cover.
• Remove the two screws and pull the
bulb out of the socket and replace
the bulb.
• Replace the bulb and reinstall the
socket into the housing.
• Install in the reverse order.
License Plate Light Replacement
• Gently pry the light assembly loose.
• T wist the socket one quarter turn and
remove the socket from the lens
housing.
• Pull the bulb straight from the socket
and replace.
Taillight Assembly
Removing Center High-Mounted Stop
Light Cover
Removing Retaining Screws
PROPER MAINTENANCE OF YOUR VEHICLE – 123
Chery Automobile Co., Ltd.
To Next Page
Loading...
