14 Infotainment System
Audio Adjust Screen
e / z (Audio/Adjust Screen):
Press to view the audio and screen
settings.
Automatic Volume Control
(AVC): The audio system adjusts
automatically with AVC to make
up for road and wind noise while
driving. The volume increases
as vehicle speed increases.
To use AVC, set the volume to the
desired level and then press ON.
To turn AVC off, select OFF.
If your vehicle is equipped
with a Bose
®
sound system,
it includes Bose AudioPilot
®
noise compensation technology.
When turned ON, AudioPilot
continuously adjusts the audio
system equalization to compensate
for background noise, so that your
music always sounds the same at
the set volume level.
This feature works best at lower
volume settings where background
noise may mask the audio.
At higher volume settings, where
the audio is much louder than
the noise, there may be little
or no change in the audio level.
For additional information on
AudioPilot, visit www.bose.com/
audiopilot.
To use this feature, set the volume
to the desired level and then press
ON. To turn it off, select OFF.
Preset selection: This feature
programs local presets that are
recalled by pressing HOME. Presets
can also be programmed while
traveling to another area and can
be stored under the AWAY setting.
See “Preset Station Menu” later in
this section for more information.
Color Scheme: Select this feature
to change the color of audio and
navigation screens. Press any of the
color options to view the different
backgrounds. Color option 1 is the
default option.
To Next Page
Loading...
Need help?
General
