18 Infotainment System
RDS (Radio Data System): See
“Radio Data System (RDS)” in this
section for more information.
INFO (Information): See “Radio
Data System (RDS)” in this section
for more information.
AutoSet:
1. Press this screen button to
replace currently stored preset
stations with the strongest
stations available in the
immediate area.
2. Press it again to return to the
original preset stations.
SOUND: See “Sound Menu”
following in this section for more
information.
Sound Menu
Press SOUND at the bottom of the
main audio screen or source menu
to change the tone, ATC, fade,
and balance for all sources.
The audio system has a separate
setting for these features for each
source preset. However, the audio
system keeps one fade and one
balance setting for all audio
sources.
To adjust sound settings:
.
Press + or − signs to adjust
TREBLE, MID (mid-range), and
BASS, if in the Manual mode
of ATC.
.
Press the L (left) or R (right)
to adjust the balance of the
speakers.
.
Press the F (front) or R (Rear) to
adjust the fade of the speakers.
.
Press the ATC screen button
to adjust the ATC setting.
See “Adjusting the Speakers”
later in this section for more
information.
After adjustments are made,
press
4 to go back to the preset
station menu. Whenever
4 is
pressed, the previously stored
information that was entered for
each preset station is recalled.
To Next Page
Loading...
