52 Infotainment System
5. If available, press INFO to view
the address information of the
selected point.
6. Press OK to store the point as a
memory point.
To edit the name of a stored point:
1. Press
N from the STORED
LOCATIONS screen.
2. Select the folder/category that
the memory point exists in.
3. Press the List screen button.
4. Select the memory point to edit.
Use the sort feature to sort by
distance, icon, name, or date
as needed.
5. Press Name from the EDIT
MEMORY POINT screen.
6. Use the backspace screen
to delete the current name or
use the alpha keypad to make
changes.
Select the Show Name On
screen button to have the name
of the point appear on the map
screen.
7. Press
4 to store the change.
To change the icon associated with
a memory point:
1. Press
N from the STORED
LOCATIONS screen.
2. Select the folder/category that
the memory point exists in.
3. Press the List screen button.
4. Select the memory point to edit.
Use the sort feature to sort by
distance, icon, name, or date
as needed.
5. Press Icon from the EDIT
MEMORY POINT screen.
6. Select the desired icon.
There are two pages (52) icons,
six icons that have sounds
associated with them, and a
No Icon button to select from.
Press the With Sound screen
button, and the sound icons
display. To hear the sound
of the icon, press the Sound
screen button next to each icon.
If the sound icons are used, the
associated sound is heard when
the vehicle is approximately
200 m (650 ft) from the memory
point.
Press the No Icon screen button
to not have an icon associated
with the point.
The new icon displays in the
EDIT MEMORY POINT screen,
next to the Icon screen button.
7. Press
4 to store the change.
To Next Page
Loading...
