Chicago Electric 68849 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
ITEM 68849
18 VOLT CORDLESS
5-1/2"
CIRCULAR SAW
WITH LASER GUIDE
REV 12c
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2011 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions

Chicago Electric 68849 Specifications

General

Brand	Chicago Electric
Model	68849
Category	Saw
Language	English

Summary

Warning Symbols and Definitions

Hazard Alert Symbol Meanings

Important Safety Information

General Power Tool Safety Warnings

Provides essential safety guidelines for operating power tools, covering shock, fire, and personal injury prevention.

Personal Safety Precautions

Operator Safety and Preparedness

Key safety measures for operators, including alertness, protective gear, and preventing accidental starts.

Power Tool Use and Care

Operating and Maintenance Guidelines

Circular Saw Safety Warnings

Blade and Workpiece Safety

Crucial safety instructions regarding blade handling, workpiece security, and tool operation.

Kickback Prevention and Operator Response

Detailed explanation of kickback causes and operator precautions to prevent it.

Circular Saw Safety: Operation and Setup

Safe Saw Operation Procedures

Instructions for safe operation, including blade depth, guards, workpiece support, and blade types.

Preventing Kickback and Tool Control

Advanced warnings on preventing kickback and maintaining control during cuts.

Circular Saw Safety: Environmental and Health

General Safety and Environmental Precautions

Grounding and Electrical Safety

Electrical Grounding Requirements

Explains grounding importance, double insulation, and precautions against electric shock.

Tool Symbology and Markings

Understanding Safety Symbols and Labels

Setup - Before Use

Pre-Operation Safety Checks

Essential safety reading and warnings before commencing any setup or operation.

Tool Functions and Components

Identifying Key Parts and Controls

Operating Instructions

Initial Tool Setup and Adjustments

Detailed steps for setting up the tool, including blade installation and depth/bevel adjustments.

Operating Instructions (cont.)

Fence Adjustment and Charging Procedure

General Operating Instructions

Pre-Operation Checklist and Basic Use

Performing Specific Cuts

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication Procedures

Troubleshooting Common Issues

Diagnosing and Resolving Tool Problems