Chicago Electric 69231

To Next Page

ITEM 69231

7″ PORTABLE WET CUTTING

TILE SAW

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2011 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual

near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and

the receipt in a safe and dry place for future reference.

Owner’s Manual & Safety Instructions

REV 12a

Main Page

Need help?

Do you have a question about the Chicago Electric 69231 and is the answer not in the manual?

Summary

WARNING SYMBOLS AND DEFINITIONS

IMPORTANT SAFETY INFORMATION

General Tool Safety Warnings

Core safety guidelines for operating the tool to prevent electric shock, fire, and serious injury.

Grounding Instructions

110-120 V~ Grounded Tools: Tools with Three Prong Plugs

Specific grounding instructions for tools with three-prong plugs and compatible outlets.

Tilesaw Safety Warnings

Essential Straight Push-stick Features and Functions

POSITION OF TILE SAW

EXTENSION CORDS

Vibration Safety

Specifications

Setup - Before Use:

Functions

Operating Instructions

Tool Set Up

Steps for setting up the tool, including blade and rip fence installation.

Work Piece and Work Area Set Up

General Operating Instructions

For Straight;Miter Cuts:

For Bevel Cuts:

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Procedures for cleaning, maintaining, and lubricating the tool for optimal performance.

Troubleshooting

Guidance on diagnosing and resolving common problems with the tool.

Parts List and Diagram

Limited 90 Day Warranty