Chicago Electric 69078 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
REV 14g
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2011 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Blade Sold Separately

Chicago Electric 69078 Specifications

General

Brand	Chicago Electric
Model	69078
Category	Saw
Language	English

Summary

Warning Symbols and Definitions

Important Safety Information

Provides essential safety guidelines for power tool operation.

General Power Tool Safety Warnings

Outlines universal safety precautions applicable to all power tools.

Work Area Safety

Details safety measures for maintaining a safe operating environment.

Electrical Safety

Personal Safety

Power Tool Use and Care

Service

Circular Saw Safety Warnings

Causes and Operator Prevention of Kickback

Explains kickback and methods to avoid it.

Vibration Safety

Grounding

Grounded Tools: Tools with Three Prong Plugs

Details the grounding requirements for tools with a three-prong plug.

Double Insulated Tools: Tools with Two Prong Plugs

Describes the use and safety of double-insulated tools.

Extension Cords

Symbology

Specifications

Setup - Before Use

Important preparatory steps and reading requirements before operating the tool.

Functions

Operating Instructions

Tool Set Up

Instructions for preparing the saw for use, including blade installation.

Depth Adjustment

Steps for setting the correct cutting depth for the workpiece.

Angle Adjustment

Instructions for setting the bevel angle for cuts.

Fence Adjustment

Guidance on setting up the fence for parallel cuts.

Batteries for Laser

Dust Collector

Work Piece and Work Area Set Up

General Operating Instructions

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Detailed instructions for cleaning and routine maintenance.

Troubleshooting

Parts List and Diagram

Assembly Diagram

Limited 90 Day Warranty