Chicago Electric 92772 Set Up And Operating Instructions

Chicago Electric 92772

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ORBITAL JIGSAW

LASER GUIDED

Model

92772

SET UP AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright

©

2005 by Harbor Freight Tools

®

. All rights reserved. No portion of this manual or any artwork

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1‑800‑444‑3353.

Manual Revised 10i

Other manuals for Chicago Electric 92772

Operating Instructions17 pages

Questions and Answers:

B
Briana BallJul 30, 2025
Why my Chicago Electric Power Tool will not start?
- J
  Justin DeanJul 31, 2025
  There are several reasons why your Chicago Electric Power Tool might not start: 1. The cord may not be properly connected. Ensure it is securely plugged in. 2. There might be no power at the outlet. Check the outlet and the circuit breaker. If the breaker is tripped, verify the circuit's capacity and ensure no other loads are present. 3. The tool's thermal reset breaker may have tripped. Turn off the tool, let it cool, and then press the reset button on the tool. 4. There could be internal damage or wear. In this case, have a technician service the tool.
D
david08Aug 6, 2025
What to do if my Chicago Electric 92772 Power Tool is overheating?
- J
  josephblakeAug 6, 2025
  If your Chicago Electric Power Tool is overheating, consider the following: * Avoid forcing the tool to work too fast; allow it to operate at its own pace. * Check and correct the alignment of the accessory to the fence or table. * Ensure cutting accessories are sharp and replace them if damaged. * Clear any blockages from the motor housing vents, wearing safety goggles and a dust mask while using compressed air. * Eliminate the use of extension cords or use one with the proper diameter for its length and load.
C
Carol TaylorAug 14, 2025
Why does the performance of my Chicago Electric 92772 Power Tool decrease over time?
- T
  Timothy TaylorAug 15, 2025
  If the performance of your Chicago Electric Power Tool decreases over time: 1. Check if the accessory is dull or damaged. Keep cutting accessories sharp and replace them as needed. 2. The carbon brushes may be worn or damaged. Have a qualified technician replace them.

Chicago Electric 92772 Specifications

General

No Load Speed	11, 000 RPM
Voltage	120V
Power Source	Corded Electric
Disc Diameter	4.5 in
Spindle Size	5/8 in
Spindle Thread	5/8 in.-11
Wheel Diameter	4.5 in

Related product manuals

Preview: Chicago Electric 92880

Chicago Electric 92880

Preview: Chicago Electric 95380

Chicago Electric 95380

Preview: Chicago Electric 99823

Chicago Electric 99823

Preview: BREAKER HAMMER 94882

BREAKER HAMMER 94882

Preview: DEMOLITION HAMMER 93853

DEMOLITION HAMMER 93853

Preview: Chicago Electric 67119

Chicago Electric 67119

Preview: Chicago Electric 67537

Chicago Electric 67537

Chicago Electric 38437

Preview: Chicago Electric 68861

Chicago Electric 68861

Preview: Chicago Electric 68221

Chicago Electric 68221

Preview: Chicago Electric 62397

Chicago Electric 62397

Preview: Chicago Electric 37793

Chicago Electric 37793