Test regularly
2.5 N·m
16
25
32
40
63
2.5
4
6
10
16
Rated current In (A)
2
Copper wire cross-sectional area (mm )
Table 2 Copper wire cross-sectional area
04
5. Wiring: Suitable for copper wire or busbar connection. See Table 2 for
wire connection
Note: Before powering on, check whether the wiring is correct, especially the incoming end should be
connected to the power supply and the outgoing end should be connected to the load, and verify the
flexibility of the handle action.
S
25mm
2
L
13mm
S
16mm
2
To Next Page
Loading...
