Need help?Do you have a question about the CHINT NXMLE Series and is the answer not in the manual?
General| Rated Voltage (Ue) | 230/400V AC |
|---|---|
| Standard | IEC/EN 60898-1 |
| Tripping Curve | B, C, D |
| Terminal Capacity | 25mm² |
| Poles | 1P, 2P, 3P, 4P |
| Rated Insulation Voltage (Ui) | 500V |
| Mechanical Endurance | 20000 cycles |
| Electrical Endurance | 10, 000 cycles |
| Mounting | DIN rail |
| Breaking Capacity (Icu) | 10kA |
Prohibits damp, flammable, corrosive environments and warns about EMI.
Warns against touching live parts and mandates power off for installation/maintenance.
Advises against direct testing and details retesting steps using 500VDC tramegger.
Details operating temp, altitude, pollution class, install category, protection class, and insulation voltage.
Covers product inspection procedures, tools, and mounting hardware for various models.
Specifies minimum installation distances (Smin, Xmin) required for product installation.
Explains panel button functions, indicator descriptions, and product operation test diagrams.
Provides comprehensive outline and installation dimensions for various NXMLE series models.
Details connecting plate and wire size specifications for NXMLE-125 models.
Details connecting plate and wire size specifications for NXMLE-250, -400, and -630 models.
Illustrates wiring diagrams for various configurations and emphasizes flash barrier installation and insulation checks.
Provides guidance on product disposal and recycling procedures according to industrial waste standards.
To Next Page
