Temperature setting
Before changing the temperature setting, please make sure the control panel isn’t locked
and ECO mode, fast freezing & fast cooling aren’t active. Temp can’t be changed if
any of the mode is active.
1）Fridge temperature setting
Press the “Fridge” key to adjust the fridge temperature to the expected temperature
value, and then press the "OK" key within 5 seconds to validate the setting, with the
flickering of the current temperature setting stopped.
The fridge temperature modes cycle as following:
“5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
‘OF’ represents the OFF state, and when the OF setting takes effect, the fridge & the
Care+ will be shut off , with the icon “℃” extinguished.
Be sure to take out all the foods in the fridge compartment & in the Care+
compartment before setting this function.
2）Freezer temperature setting
Press the Freezer key to adjust the freezer temperature to the expected temperature
value, and then press the "OK" key within 5 seconds to validate the setting, with the
flickering of the current temperature setting stopped.
The freezer temperature setting cycles as following:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃；
3）Variable temperature setting
Press the “Variable” key to adjust the variable temperature to the expected value,
and press the “OK” key within 5s or wait 5s without pressing any key, then the
temperature setting gets validated, with the flickering of the current temperature
stopped.
The variable temperature settings cycle as following;
-18℃→-17℃→-16℃→-15℃→-14℃→-13℃→-12℃→-11℃→-10℃→-09℃→-08℃→-
07℃→-06℃→-05℃→-04℃→-03℃→-02℃→-01℃→00℃→01→02℃→03℃→04℃→
05℃→OF
OF represent the OFF state, and when the ‘OF’ setting takes effect, the icon ‘℃’
lights off, with cooling of the variable temperature zone shut off.
To Next Page
Loading...
