Fast Freeze
When the “Fast Freeze” function is activated, the freezer temperature is automatically
set at -32 ℃, and after running for 26 hours, the Fast Freeze function will be turned
off. Cooling down the freezer temperature in a rapid manner is beneficial to the
prevention of food nutrition against loss and the preservation of freshness.
When the “Fast Freeze” function is active, the temperature is displayed to be "- 32℃",
which is subject to no change.
To enter or exit the Fast Freeze function
When keys are unlocked, you can hold down the “+” key for 3s to enter or exit the
“Fast Freeze” function.
Note: If the freezer temperature is set below zero (i.e., at the freezer mode) before the
fast-freeze function is enabled, it will restore to the set temperature after the “Fast
Freeze” function exits; and if the freezer temperature is set above zero (i.e., at the
fridge mode) before the fast-freeze function is enable, it will return to -18 ℃ by
default after the “Fast Freeze” function exits.
Please note the appliance is using sensitive thermostat, it will keep more stable
temperature inside the unit. In order to do so, the compressor might cut in and
out more often which is normal operation of the unit.
Frost or ice on the top cabinet edge area or near the door hinge
The appliance has special design on the seal design. There are small holes on the door
seal near the hinge area. They will release the air pressure quickly and the door can be
opened again quicker if need to.
The design will bring little air exchange in and out and build up more frost or ice
near the hinge area. The ice or frost won't affect any freezer performance, it can be
wiped off easily. (The locations were circle marked as below)
To Next Page
Loading...
