Chris-Craft Lancer 20 User Manual

Systems
Chris-Craft 3–51
Troubleshooting the AC System
Table 3-6. AC Electrical Troubleshooting Chart
Problem Cause
Solution
No AC power
Main breaker(s) tripped of OFF Turn breakers ON or reset.
Breaker(s) at main AC panel tripped or
OFF
Turn breakers ON or reset.
Shore power cord not securely
connected
Check cord; plug in if necessary.
Loose or disconnected wire(s)
Tighten connections, or refer to
qualified marine electrician.
No power to AC devices
Breaker(s) at main AC panel tripped or
OFF
Turn breakers ON or reset.
Shore power cord not connected Check cord; plug in if necessary.
Loose or disconnected wire(s)
Tighten connections, or refer to
qualified marine electrician.
Ground fault interrupter tripped Reset button on outlet and test.

Chris-Craft Lancer 20 Specifications

General

Brand	Chris-Craft
Model	Lancer 20
Category	Boat
Language	English