3–12 Chris-Craft
Systems
Fuel Systems
Leaking fuel is a fire and explosion hazard. Inspect the system on a
regular basis. Inspect all fittings, valves, filters, hoses, and connec-
tions for leaks. Do not operate the engine(s) if any fuel leak is
present.
Do not store fuel or flammable liquids in a closed area. Explosive
vapors may accumulate.
The fuel system is installed and tested in accordance with American
Boat and Yacht Council (ABYC) Standard H-33. Only qualified per-
sons familiar with the practices established in this standard should
make repairs or modifications to the fuel system.
The fuel system is comprised of the following components:
• Fuel Tank and Routing Lines
• Fuel Gauges/Sending Units
• Fuel Shut-off Valve(s)
• Fill Deck Plate
• Fuel Tank Vent(s)
• Fuel Filter(s)
• Fuel Fill Hose
• Fuel Tank Vent Hose
• Engine Fuel Feed Hose
• Sending Unit
To Next Page