Systems
Chris-Craft 3–5
Lancer 22 Rumble
The Rumble seat hatch cover must be installed when the vessel is
not in use.
To avoid injury, keep away from the hatch during operation.
This 22-foot boat features a 2-person seat in the middle of the foredeck similar to classic “rumble seat”
boats from the past.
When the foredeck is closed, the Lancer has the same beautiful lines as the Lancer 20 and Corsairs. When
opened, the Lancer 22 Rumble reveals seating for two (Figure 3-3).
A pair of hydraulic actuators opens and closes the hatch to reveal the seat. The system has its own hydrau-
lic pump and reservoir. A rocker switch on the control panel activates the hatch.
Always keep the rumble seat cover closed when not in use. This helps prevents water
intrusion and keeps the rumble seat dry when operating the boat.
Figure 3-3. Lancer 22 Rumble Seat
To Next Page
Loading...
Need help?
General
