EasyManuals Logo

Chris-Craft Lancer 20 User Manual

Chris-Craft Lancer 20
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #153 background imageLoading...
Page #153 background image
Trailering
Chris-Craft E–5
BOAT RETRIEVAL
_________
Tilt the outboard or stern drive(s) up.
_________
Back trailer down ramp and into the water. Do not submerge the trailer too deep.
_________
Secure the tow vehicle with the parking brake and chocks.
_________
Guide the boat onto the trailer. Use bow and stern lines to help.
_________
Hook winch cable to boat stem eye.
_________
Pull boat onto the trailer and temporarily secure the boat.
_________
Remove tow vehicle from ramp and drive to the securing area.
_________
Remove drain plug and drain the bilge.
_________
If in salt water wash hull and trailer with fresh water as soon as possible.
_________
Inspect the propeller for nicks or damage.
_________
Inspect the hull for damage.
_________
Wipe hull to prevent water spots and to keep the hull clean.
_________
If desired at this time clean the boat and prepare for next outing.
_________
Properly secure the boat for road travel.
_________
Reconnect trailer lights and ensure they are operational.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chris-Craft Lancer 20 and is the answer not in the manual?

Chris-Craft Lancer 20 Specifications

General IconGeneral
BrandChris-Craft
ModelLancer 20
CategoryBoat
LanguageEnglish

Related product manuals