1–4 Chris-Craft
Introduction
General Specifications
Performance
Performance is based upon the type of options you selected for your Chris-Craft. When you take posses-
sion of your boat you receive the appropriate books for your boat. As the owner/operator it is your respon-
sibility to familiarize yourself with the performance specifications and maintenance requirements of your
engine.
Table 1-1. General Specifications
Model Lancer 20 Launch 22 Launch 25 Launch 28
Lancer 22
Rumble
Corsair 25 Corsair 28
Overall Length 20’ 2” 23’ 5” 27’ 2” 28’ 0” 23” 5” 25’ 4” 28’ 0”
Beam 7’ 11” 8’ 3” 8’ 6” 10’ 0” 8’ 3” 8’ 6” 10’ 0”
Dry Weight 2,850 lbs 4,019 lbs 5,105 lbs 7,500 lbs 4,019 lbs 4,600 lbs 7,500 lbs
Deadrise 20 deg 20 deg 20 deg 20 deg 20 deg 20 deg 20 deg
Draft 34/17.5” 35.75/19” 36.5/20” See Note 1 35.75/19” 35/17” See Note 2
Fuel Capacity 34 gal 58 gal 85 gal 150 gal 58 gal 82 gal 150 gal
Water Capacity N/A 9 gal 9 gal 35 gal 9 gal 9 gal 35 gal
Notes:
1. Twin Engine Draft: 33.5/20”
Singe Engine Draft: 35/17”
2. Twin Engine Draft: 33.5/20”
Singe Engine Draft: 35/17”
Table 1-2. Maximum Persons Capacities
Model Lancer 20 Launch 22 Launch 25 Launch 28
Lancer 22
Rumble
Corsair 25 Corsair 28
U.S. Standard 5 8 10 N/A 8 10 N/A
CE Standard 5 7 9 10 7 9 10
Table 1-3. Bridge Clearances
Model Lancer 20 Launch 22 Launch 25 Launch 28
Lancer 22
Rumble
Corsair 25 Corsair 28
U.S. Standard 3’ 7” 3’ 9” 4’ 5” 4’ 6” 3’ 9” 4’ 1½” 4’ 6”
Metric 1.092m 1.124m 1.340m 1.390m 1.124m 1.26m 1.390m
To Next Page
Loading...
Need help?
General
