Chris-Craft Launch 22 - Figure 3-5. Fire Alarm Indicator; Figure 3-6. Optional Engine Fire Extinguisher

3–8 Chris-Craft
Systems
The fire extinguishing agent used is as follows:
• For domestic use: FE241
• For international use: FM200
You should frequently check the fire extinguisher for the correct pressure. If the pressure is below specifi-
cation, have the unit serviced.
You should also weigh the cylinder (less the bracket) for proper weight. If the gross weight has deviated
from the specification label, service or replace the fire bottle. Weigh the cylinder at least twice a year.
Figure 3-5. Fire Alarm Indicator
Figure 3-6. Optional Engine Fire Extinguisher