Need help?Do you have a question about the Christie Boxer 4K Series and is the answer not in the manual?
Read all safety and warning guidelines before installing or operating the projector.
Details hazardous optical and thermal radiation zones and distances for safe operation.
Explains product labels and general fire and shock hazards.
Describes electrical safety symbols and additional hazard warnings.
Provides a general description of the projector and contact information for dealers.
Highlights key features and explains how the projector operates.
Details product documentation, related documents, site requirements, and operating environment.
Explains power connection methods and identifies main projector components.
Describes the IR/wired remote keypad and display panel components.
Guides for turning the projector on/off and understanding LED status indicators.
Specifies the orientation for front, rear, or inverted projection.
Sets image resize presets for maximizing display resolution.
Adjusts lens settings including offset, zoom, focus, and motor locking.
Details keep-out areas for lens position to prevent interference.
Specifies keep-out areas for ultra short throw lens positioning.
Calibrates primary color accuracy and adjusts chromaticity values.
Adjusts color saturation, signal color, and color space decoding.
Adjusts color values using gamma function and selects color correction modes.
Adjusts image display based on ambient lighting conditions.
Sets frame delay for synchronization and enables film motion detection.
Adjusts image sharpness and creates seamless images with edge blending.
Modifies image geometry, enables warping for non-flat surfaces.
Corrects image distortion due to keystone effect.
Crops pixels from display edges using the blanking feature.
Sets and synchronizes the projector's date and time.
Selects the background color for the splash screen.
Determines OSD position and changes the display language.
Sets temperature units and changes the user account password.
Accesses generated password and enables startup with low voltage.
Configures resume after power interruption and electronics in standby.
Enables stealth mode and direct pass-through of input signals.
Disables secondary DVI receivers and informs source of signal preferences.
Adjusts lamp power and selects lamps using BrightSelect feature.
Enables color mode for camera compatibility to reduce red shift.
Enables projector communication and sets remote access levels.
Sets up Art-Net communication via Ethernet and lists channels.
Provides an index list for input channel selections.
Automates tasks using scheduled and GPIO event macros.
Covers copying, editing, and deleting macros.
Configures GPIO pins and details the GPIO connector pinout.
Saves, imports, restores, renames, exports, and deletes projector profiles.
Details upgrading projector software and adding software licenses.
Exports and imports projector settings to/from external devices.
Resets all custom settings to the projector's factory default values.
Displays Boxer 4K software licenses and general information.
Monitors lamp status, hours, and sets end-of-life warnings.
Freezes images for analysis and uses test patterns for diagnostics.
Modifies characteristics of grey, ramp, and grid test patterns.
Enables specific test pattern colors, selects engine patterns, and views status.
Uses Christie TAP mobile app to monitor projector and lamps.
Captures diagnostic information for troubleshooting issues.
Sets SNMP read community string, configures traps, and defines trap IP addresses.
Downloads SNMP MIB files and restores factory default settings.
Details panel resolution, refresh rate, contrast, and color resolution.
Specifies compatibility for Ethernet, 3D sync, and other interfaces.
Lists shipped and optional input cards and interface details.
Details temperature thresholds for projector shutdowns.
Lists warning thresholds for fan speeds and liquid cooling.
Specifies rated voltage, current, line frequency, and AC input couplers.
Provides projector dimensions, weight, and operating position.
Lists accessories, regulatory compliance, and safety standards.
Details environmental compliance directives and electromagnetic compatibility standards.
Specifies temperature, humidity, and altitude requirements for operation.
Lists video formats supported by HBMIC and QDPIC cards.
Details video formats for SDI interfaces (HD, 3G, 6G, 12G).
Lists video formats supported by TDPIC and DDIC cards.
Lists video formats supported by THIC and HDBase-T cards.
Lists video formats for the 3GIC card for HD and 3G-SDI.
To Next Page
General