How to adjust focus on Christie DWU951?
If the focus or horizontal phase settings are not properly adjusted on your Christie Projector, adjust the focus using the FOCUS + / - buttons and/or H PHASE using the menu functions.
What to do if the frequency of the input signal is not within the specified range for Christie DWU951?
If the horizontal or vertical frequency of the input signal is not within the specified range for your Christie Projector, confirm the specifications for your projector or the signal source.
How to correct input settings on Christie DWU951 Projector?
If the input settings on your Christie Projector are mismatched, select the correct input signal and adjust the settings accordingly.
How to increase brightness on Christie Projector?
If the brightness on your Christie Projector is too low, adjust the BRIGHTNESS to a higher level using the menu functions.
What to do if my Christie DWU951 is overheating?
If your Christie Projector is overheating, turn the power off and allow it to cool down for at least 30 minutes. After it has cooled, and you've confirmed proper ventilation, turn the power on again.
What to do if my Christie DWU951 remote is not working?
If your Christie Projector remote isn't working, the batteries might be drained. Try replacing the batteries.
How to fix no input signal on my Christie Projector?
If your Christie Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
To Next Page
General
