Why does my Christie DWX600-G have no image on screen?
First, ensure all cables and power connections are correctly and securely connected. Next, check if the lamp is securely installed. Finally, make sure you have removed the lens cap and the projector is switched ON.
What to do if the image on my Christie DWX600-G Projector is out of focus?
First, check that both lens caps (front and back) are removed. Then, adjust the lens focus. Also, ensure the projection screen is within the required distance.
How to fix a partial or scrolling image on my Christie DWX600-G Projector?
Try pressing the “AUTO” button on the control panel or remote control. If using a PC, verify that your display resolution setting is lower than or equal to WUXGA (1920 × 1200) in the “Display” settings of the “Control Panel”. If the projector is still not projecting the whole image, change the monitor display and verify the resolution setting is lower than or equal to WUXGA (1920 × 1200).
What to do if my Christie Projector image is too small or too large?
Adjust the lens zoom to fit the screen. If it still doesn't fill the screen properly, verify that the correct lens is in use or change the position of the projector.
How to fix unstable or flickering image on Christie DWX600-G Projector?
Try using the “Pixel Track” and “Pixel Phase” settings to correct the image. Alternatively, change the monitor color setting on your computer.
How to fix image that has vertical flickering bar on Christie DWX600-G Projector?
Try using the “Auto Image” feature to make an adjustment. You may also need to check and reconfigure the display mode of your graphic card to ensure it is compatible with the projector.
What to do if my Christie DWX600-G Projector lamp burns out or makes a popping sound?
If the lamp burns out, try power cycling the projector. If the lamp doesn't fire or you hear a loud pop, the projector will not turn on until the lamp module has been replaced.
Why is the image stretched when displaying 16:9 DVD title on my Christie DWX600-G?
When playing anamorphic or 16:9 DVDs, set the projector display mode to 16:9 in the OSD. If playing 4:3 format DVDs, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9 (wide) on your DVD player.
What if the notebook screen isn't displaying the presentation on my Christie DWX600-G Projector?
Some Notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer manual for detailed information on how to reactivate it.
How to fix a partial or scrolling image on Christie Projector when using a notebook?
Adjust the resolution of the computer. Press the appropriate keys for your notebook manufacturer to send the signal from the notebook to the projector. For example, [Fn]+[F4]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment, including the projector.
To Next Page
General
