Need help?Do you have a question about the Chroma 63201 and is the answer not in the manual?
General| Brand | Chroma |
|---|---|
| Model | 63201 |
| Category | Test Equipment |
| Language | English |
Details the electrical and performance specifications for various models in the 63200 series.
Details how to set the line voltage switch for proper and safe operation of the instrument.
Explains how to connect the electronic load to the UUT for various testing applications.
Provides guidelines for making proper input connections, including wire size and polarity.
Describes how to connect the load for remote operation via GPIB or RS-232C interfaces.
Explains how to configure and use the Constant Current (CC) mode of the electronic load.
Details the operation and settings for the Constant Resistance (CR) mode of the load.
Explains the parameters and usage of the Constant Voltage (CV) mode for the electronic load.
Describes how to operate the electronic load in Constant Power (CP) mode.
Describes the over voltage alarm and protection mechanism of the load.
Explains the over current limit and protection features within the load.
Details the over power protection circuit and its activation conditions.
Describes the over temperature protection that will turn off the load.
Explains the reverse voltage detection and its corresponding protection.
Details how to select and set CC, CR, CV, and CP modes and their parameters.
How to set GO/NG specification limits for test parameters in different modes.
Guides on setting various operational parameters like Von, limits, and modes.
Commands for controlling and setting current parameters in various operational modes.
Commands for fetching measured values like current, voltage, and power.
Commands for controlling load state, short simulation, and protection features.
Commands for creating, saving, and running program sequences for testing.
Commands for setting and checking test specifications (GO/NG results).
To Next Page
