Need help?Do you have a question about the Chroma 63204 and is the answer not in the manual?
General| Model | 63204 |
|---|---|
| Category | Test Equipment |
| Type | DC Electronic Load |
| Voltage Resolution | 0.1mV |
| Current Resolution | 0.1mA |
| Operating Modes | CC, CR, CV, CP |
| Interface | USB, RS232, GPIB |
Precautions before applying power.
Importance of proper grounding.
Prohibition of operation in hazardous atmospheres.
Restriction on user access to internal components.
Technical parameters and operating ranges of the loads.
Instructions for connecting the load to the UUT.
Explanation of switching between front panel and remote control.
How to set and use the CC mode.
How to set and use the CR mode.
How to set and use the CV mode.
How to set and use the CP mode.
Configuring start/stop behavior for sinking current.
Simulating short circuits and its operation.
Overview of the load's protection mechanisms.
Setting up and running test programs.
Detailed guide to front panel controls and display.
How to select and configure operating modes (CC, CR, CV, CP).
Configuring test programs using sequences and files.
Setting up various operational parameters and system configurations.
Commands specific to the electronic load's functions.
To Next Page
