Chroma 63200 Series - User Manual

Chroma 63200 Series Specifications

General

Brand	Chroma
Model	63200 Series
Category	Test Equipment
Language	English

Summary

Legal Notices

Warranty

Material Contents Declaration

Safety Summary

Safety Symbols

Revision History

General Information

Introduction

Overview of the manual's scope and testing standards.

Specifications

Details technical specifications for the 63200 series electronic loads.

Installation

Introduction

Guide to installing the 63200 series load and turn-on check procedures.

Parallel Connections

Procedures for connecting multiple 63200 series loads in parallel.

Parallel Setting

Configuration steps for setting up parallel operation modes.

Operation Overview

Front Panel Description

Detailed description of the load's front panel controls and display.

Modes of Operation

Explanation of the four operation modes: CC, CR, CV, and CP.

Protection Features

Overview of the load's built-in protection mechanisms like over power and over current.

Local Operation

Introduction

How to operate the electronic load using the local panel.

Setting the Operation Mode

Step-by-step guide to setting operation modes like CC, CR, CV, CP.

Setting the Configuration

Configuration setup for features like Von point, current limit, and auto load.

Basic Information for Programming

Introduction

Remote programming via GPIB or RS-232 for 63200 series electronic loads.

Setting the GPIB Address and RS-232 Parameters

How to set GPIB address and RS-232 communication parameters.

Introduction to Programming

Basic Definition

Explanation of command statements, keywords, and query commands for programming.

Separators and Terminators

Rules for data separators, keyword separators, and program line terminators.

Language Dictionary

Common Commands

Standard IEEE488.2 commands and queries for instrument control.

CONFigure Sub-system

Commands for configuring settings like AUTO, LOAD, MODE, DISPLAY, and REMOTE.

MEASure Sub-system

Commands for measuring current, voltage, power, resistance, and status.

Command Index

Command Summary

A summary list of common and instrument commands.

Verification

Introduction

Procedures for checking operation and verifying specifications of Chroma 63200 Series loads.

CR Mode Verification

Test procedures to verify programmed resistance in CR mode.

Appendix A List of Functions & Mapped F;W Versions