Appendix A List of Functions & Mapped F/W Versions
1
Appendix A List of Functions & Mapped
F/W Versions
1. The F/W version supported for External LOAD ON/OFF:
1.1 Host version (MAIN): Standard 1.50 & Customized 2.41A as well as subsequent
versions.
1.2 Load version (MAIN): All applicable.
1.3 Panel version (MAIN): Standard 1.60 & Customized 2.42A as well as subsequent
versions.
2. Additional functions and the mapped F/W version:
2.1 Add Timeout function in Battery
2.2 Modify the minimum setting of 63200 Series CV Mode to 0V
2.3 Add Recall Default function
2.4 External ON/OFF supports all Modes and Programs
2.5 Add SHORT KEY: ENABLE/DISABLE function
2.6 Change the text "CHROMA ATE Inc." to "Chroma ATE Inc." in copyright
※The F/W supported versions for items 2.1 to 2.6 are:
Host version (MAIN): Standard 2.41 & Customized 2.41A as well as subsequent
versions.
Load version (MAIN): Standard 2.40 & Customized 2.40A as well as subsequent
versions.
Panel version (MAIN): Standard 2.42 & Customized 2.42A as well as subsequent
versions.
3. Upgrade the specification of 63202 to 600V. The mapped F/W versions are:
3.1 Host version (MAIN): Standard 2.41 and subsequent versions.
3.2 Load version (MAIN): Standard 2.40 and subsequent versions.
Panel version (MAIN): Standard 2.42 and subsequent versions.
4. For Firmware version 2.50 or above, the TIMEOUT function described below is added to
all models of entire series.
TIMEOUT can set to TIME=00:00:00s which means no TIMEOUT limit. When
TIMEOUT is set to TIME=00:00:00s, the counter in TIMING mode can count to
TIME=9999:59:59s and restart from TIME=00:00:00s. The loading will not be
interrupted due to recount.
To Next Page
Loading...
