Chroma 66201 - Page 61

Using Remote Control
FETCh [ : SCALar ] : POWer : PFACtor?
MEASure [ : SCALar ] : POWer : PFACtor? 66201 | 66202
Description: These queries return the power factor.
Setting Syntax:
none
Setting Parameters: none
Query Syntax: FETCh:POWer:PFACtor?<PMT> , MEASure:POWer:PFACtor?<PMT>
Response Parameters: <NR2>
Header on: :FETCH:POWER:PFACTOR<space><NR2><RMT>
Header off: <NR2><RMT>
Example: none
FETCh [ : SCALar ] : POWer : ENERgy?
MEASure [ : SCALar ] : POWer : ENERgy? 66202
Description: These queries return the energy in Joule when the ENER:MODE is JOULE or
return the energy in watt hour when the ENER:MODE is WHR.
Setting Syntax:
none
Setting Parameters: none
Query Syntax: FETCh:POWer:ENERgy?<PMT> , MEASure:POWer:ENERgy?<PMT>
Response Parameters: <NR2>
Header on: :FETCH:POWER:ENERGY<space><NR2><RMT>
Header off: <NR2><RMT>
Example: none
FETCh [ : SCALar ] : VOLTage : RMS?
MEASure [ : SCALar ] : VOLTage : RMS? 66201 | 66202
Description: These queries return the r.m.s. voltage.
Setting Syntax:
none
Setting Parameters: none
Query Syntax: FETCh:VOLTage:RMS?<PMT> , MEASure:VOLTage:RMS?<PMT>
Response Parameters: <NR2>
Header on: :FETCH:VOLTAGE:RMS<space><NR2><RMT>
Header off: <NR2><RMT>
Example: none
FETCh [ : SCALar ] : VOLTage : PEAK+?
MEASure [ : SCALar ] : VOLTage : PEAK+? 66201 | 66202
Description:
These queries return the plus value of peak voltage.
Setting Syntax:
none
Setting Parameters: none
Query Syntax: FETCh:VOLTage:PEAK+?<PMT> , MEASure:VOLTage:PEAK+?<PMT>
Response Parameters: <NR2>
Header on: :FETCH:VOLTAGE:PEAK+<space><NR2><RMT>
Header off: <NR2><RMT>
Example: none
5-19