Digital Power Meter 66200 Series User’s Manual
Separator 1: <NR1>;<NR1><RMT>
Example: none
CALIBRATION Sub-system
CALIbration : AUTO? 66201 | 66202
Description:
The command is used to force 662xx to re-calibrate the offset of current. If
ambient temperature variation is too much, user may program this command to
improve the accuracy.
Setting Syntax: none
Setting Parameters: none
Query Syntax: CALIbration:AUTO?<PMT>
Response Parameters: <CRD>, OK∣FAIL
Header on: :CALIBRATION:AUTO<space><CRD><RMT>
Header off: <CRD><RMT>
Example: none
5-32
To Next Page
Loading...
