• Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable level while
the Uconnect system is speaking. Please note the volume setting for Uconnect is different
than the audio system.
NOTE:
To access help, push the Uconnect Phone button
on the steering wheel and say "help."
Press the display or press either the Phone
or VR button and say "cancel" to cancel
the help session.
Using Do Not Disturb
With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to
keep your eyes on the road and hands on the wheel. For your convenience there is a counter
display to keep track of your missed calls and text messages while you were using Do Not Disturb.
Do Not Disturb can automatically reply with a text message, a call or both, when declining an
incoming call and send it to voicemail.
Automatic reply messages can be:
• “I am driving right now, I will get back to you shortly.”
• Create a custom auto reply message up to 160 characters.
While in Do Not Disturb, Conference Call can be selected so you can still place a second call
without being interrupted by incoming calls.
NOTE:
• Only the beginning of your custom message will be seen on the touchscreen.
• Reply with text message is not compatible with iPhones.
• Auto reply with text message is only available on phones that supporting Bluetooth MAP.
Incoming Text Messages
After pairing your Uconnect system with a Bluetooth enabled mobile device with the Message
Access Profile (MAP), the Uconnect system can announce a new incoming text message and
read it to you over the vehicle’s audio system.
NOTE:
Only incoming text messages received during the current ignition cycle can be viewed/read.
To enable incoming text messaging:
iPhone
1. Press the settings button on the mobile phone.
2. Select Bluetooth.
• Ensure Bluetooth is enabled, and the mobile phone is paired to the Uconnect system.
3. Select
located under DEVICES next to Uconnect.
ELECTRONICS
117
To Next Page