DRIVER INFORMATION DISPLAY (DID)
The DID features a driver interactive display that is located in the instrument cluster. Pushing the
controls on the left side of the steering wheel allows the driver to select vehicle information and
Personal Settings. Refer to “Programmable Features” in this guide for further information.
• Push the UP
arrow button to scroll
upward through the main menus (Speed-
ometer, Vehicle Info, Driver Assist, Fuel
Economy, Trip, Audio, Messages, Screen
Setup) and sub menus.
• Push the DOWN
arrow button to
scroll downward through the main menus
and sub menus.
• Push the RIGHT
arrow button to scroll
forward to the next menu or sub menu.
• Push the LEFT
arrow button to scroll
back to a previous menu or sub menu.
• Push the OK button to access/select the
information screens, the submenu screens
of a main menu item, or to select a personal
setting in the setup menu. Push and hold the OK button for two seconds to reset displayed/
selected features that can be reset.
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When
the vehicle is new, the compass may appear erratic, and the cluster will display dashes (- -) until
the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an area free
from large metal or metallic objects) until the dashes (- -) displayed in the DID turns off. The
compass will now function normally.
Driver Information Display (DID) Controls
ELECTRONICS
122
To Next Page
Loading...
