HEADLAMP LEVELING MOTOR DIAGNOSIS
CONDITION POSSIBLE CAUSES CORRECTION
ONE MOTOR DOES NOT
OPERATE
1. Poor connection at motor. 1. Secure connector on motor.
2. No voltage at motor. 2. Repair circuit. Refer to Group 8W,
Wiring.
3. Defective motor. 3. Replace motor.
BOTH MOTORS DO NOT
OPERATE
1. No voltage at headlamp leveling
switch.
1. Repair circuit or replace fuse. Refer to
Group 8W, Wiring.
2. No voltage at both motors. 2. Repair circuit or replace fuse. Refer to
Group 8W, Wiring.
3. Poor connection at motors. 3. Secure connectors on motors.
4. Both motors defective. 4. Replace motors.
8L - 4 LAMPS LH
DIAGNOSIS AND TESTING (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID
To Next Page
Loading...
