116 GETTING TO KNOW YOUR VEHICLE
5. Once the driver’s side crossbar is in place,
tighten the thumb screws completely.
Tightening Crossbar
6. Repeat the procedure to stow the second
crossbar on the opposite side.
Stowed Crossbars
NOTE:
To help control wind noise, stow the cross-
bars in the side rails when they are not in use.
If any metallic object is placed over the satel-
lite radio antenna (if equipped), you may
experience interruption of satellite radio
reception.
21_RUP_OM_EN_USC_t.book Page 116
To Next Page
Loading...
