SAFETY 281
3. Route the shoulder belt to the inside of the
left head restraint.
Routing The Rear Seat Belt Latch Plate
4. When the seat belt is long enough to fit,
insert the mini-latch plate into the
mini-buckle until you hear a “click.”
Connect Mini-Latch To Mini-Buckle
5. Sit back in seat. Slide the regular latch plate
up the webbing as far as necessary to allow
the seat belt to go around your lap.
Rear Center Seat Belt Buckled
1 — Seat Belt Latch Plate
1 — Seat Belt Latch Plate
2 — Seat Belt Buckle
6
21_RUP_OM_EN_USC_t.book Page 281
To Next Page
Loading...
