•
Back / Left Arrow Button
Push and release the left
arrow button to access
the information screens or submenu screens of a
main menu item.
•
Up Arrow Button
Push and release the up
arrow button to scroll
upward through the Main Menu items.
•
Right Arrow Button
Push and release the right
arrow button to
access the information screens or submenu screens
of a main menu item.
•
Down Arrow Button
Push and release the down
arrow button to
scroll downward through the Main Menu items.
•
OK Button
Push the OK button to access/select the informa-
tion screens or submenu screens of a Main Menu
item. Push and hold the OK button for two seconds
to reset displayed/selected features that can be
reset.
OIL LIFE RESET
Use this QR code to access your digital
experience.
•
Your vehicle is equipped with an
engine oil change indicator system.
The “Oil Change Required” message
will display for approximately five
seconds after a single chime has
sounded, to indicate it is time to change the engine
oil. The engine oil change indicator system is duty
cycle based, which means the engine oil change
interval may fluctuate, dependent upon your per-
sonal driving style.
•
Unless reset, this message will continue to display
each time the ignition is cycled to the ON/RUN
position.
•
To reset the oil change indicator after performing
the scheduled maintenance, refer to the following
procedure.
NOTE:
This procedure should only be performed after sched-
uled maintenance is completed. Resetting oil life other
than when associated with a scheduled maintenance
may result in damage due to not properly maintaining
the engine oil.
Oil Life Reset
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the vehicle.)
2. Push the OK button to enter the instrument cluster
display menu screen.
3. Push and release the down
arrow button to
access the ”Vehicle Info” menu screen.
4. Push the left
arrow button or right arrow but-
ton to access the “Oil Life” submenu.
5. Hold the OK button to reset the “Oil Life” to 100%.
6. Push the up
arrow button to exit the instrument
cluster display menu screen.
Secondary Method For Oil Life Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pushing the brake pedal, place the ignition
in the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Instrument Cluster Display Controls
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
Scan me
GETTING TO KNOW YOUR INSTRUMENT PANEL 61
3
To Next Page
Loading...
