Chuango H4-LTE - Notification Management; Alarm Tone and Email Alerts; SMS and Phone Call Alerts; Remote Control Keypad Commands

23
Notications
(1) You can select an alarm tone and set up email alerts on this page.
Note: Because of the system limitations, this feature won’t be available for Android 8.0 or above smartphone users.
(2) Store phone numbers for SMS texts and phone calls
The stored phone numbers (up to 5 numbers) will receive SMS and phone calls in
case of triggered alarms.
The Hub will make phone calls to the stored phone numbers successively (up to 3
rounds in turn). If the phone call is answered and any keypad command has been
operated by one of these users, it will stop calling the next phone number; otherwise
it will continue to remind users until it is up to 3 rounds.
Keypad Commands
Phone
Button
Function
0
Disarm
1 Arm
3 Listen in
# Hang Up
6 Turn Off Siren
9 Turn On Siren
* Two-Way Talk
Note: App alert notifications will be sent firstly, and then SMS and phone calls will follow
immediately.
(3) Enable email notication for alarm alerts.