Need help?Do you have a question about the Chuango H4-LTE and is the answer not in the manual?
Describes how to arm the system using remote control or app.
Explains how sensors trigger alarms and notifications.
How the sensor detects openings and sends alerts.
Explains motion detection, self-test, and low battery indications.
Instructions for finding and installing the "HomeCloud System" app.
Steps for signing up and logging into the app account.
Explains the process of connecting the hub to the app.
Steps to set the hub to WiFi configuration mode.
Steps to connect the hub's hotspot to the smartphone.
Inputting home WiFi credentials for the hub.
How to switch the hub to a different WiFi network.
Requirements for using the cellular network (SIM card, power).
Explains WiFi backup and standalone cellular use.
Steps for setting up cellular when no WiFi is available.
Meaning of cellular indicator light behavior.
Overview of arming, disarming, and status indicators in the app.
Details what happens when the system is armed.
Setting up the cellular connection with a SIM card and APN.
Explains Normal, Home, 24-Hour, and Delay zones for sensors.
Controlling the system using phone calls and keypad commands.
List of commands for remote phone operation.
Guidance on where to install the hub for optimal signal.
How to choose a location and test the sensor.
Recommended height and location to avoid false triggers.
General| Brand | Chuango |
|---|---|
| Model | H4-LTE |
| Category | Home Automation |
| Language | English |
To Next Page
