Need help?Do you have a question about the CIAT AQUALIS 2 65 HT and is the answer not in the manual?
Essential safety parameters to consider during installation, commissioning, and adjustment.
Specifications for water connection diameters and flow rates for different models.
Procedure and precautions for adding glycol to the water circuit for frost protection.
Detailed instructions for making electrical connections to the unit, including power supply requirements.
Pre-startup checks for refrigerant leaks, water flow, and electrical connections.
Step-by-step guide for starting the unit and setting initial operating parameters.
Procedure for bleeding air from the water circuit for optimal system performance.
Essential annual checks including leak detection, filter cleaning, and electrical connections.
Detailed explanation of the terminal unit screen, its indicators, and buttons.
Description of dial positions and corresponding modes for reversible and non-reversible units.
Instructions on how to access and change unit settings (customer and installer levels).
Explanation of different operating modes (cooling, heating, frost protection) and their settings.
Configuration of auxiliary units and bypass possibilities using setting P6.
Operating limits for electrical auxiliary units based on outdoor and water temperatures.
How to use a boiler as a backup, either by its own system or Microconnect control.
Instructions for controlling the unit remotely via On/Off inputs and bypass functions.
Description of the CPU control board, its components, and terminal block layout.
Table listing various fault codes, descriptions, types, and possible causes.
Table detailing technical specifications, quantities, and ratings for different Aqualis 2 models.
To Next Page
General