To Next PageTo Next Page
Need help?Do you have a question about the CIAT AUREA 60 and is the answer not in the manual?
Guidance on avoiding accidents during installation, commissioning, and adjusting operations, considering material conditions.
Steps before adjusting settings, including turning on power, setting water flow, and monitoring temperatures.
Description of the microprocessor-based electronic controller for managing heat pump functions and alarms.
Defines how to set up all functions handled by the controller, including how to proceed if factory settings are unsuitable.
Accessing and modifying user-specific working parameters for the heat pump, protected by a password.
Accessing and modifying factory configuration parameters for the heat pump, protected by a different password.
Procedure for acknowledging faults by deactivating their signaling and fault relay.
Enabling or disabling heating (HEAT) and cooling (COOL) modes. Notes on direct switching limitations.
Details on how high pressure faults are detected, trigger the fault relay, and affect compressor operation.
Information on low pressure faults and compressor thermal protection faults, including their detection and impact.
Explanation of low and high pressure pressostats, their connection, and role in controlling compressor operation.
Description of antifrost sensors and water flow switches as safety devices protecting the heat pump.
Essential checks before startup, including leak detection, water circulation, purging air, and electrical connections.
Steps for applying power, checking operation on the display, and selecting the operating mode.
General
