To Next PageTo Next Page
Need help?Do you have a question about the CIAT AUREA 50 and is the answer not in the manual?
General| Type | Air-to-Water Heat Pump |
|---|---|
| Heating Capacity | 55 kW |
| EER | 3.5 |
| COP | 4.0 |
| Refrigerant | R410A |
| COP Heating | 4.0 |
| EER Cooling | 3.5 |
Essential precautions for installation, commissioning, and adjustment operations.
Advice on selecting the optimal indoor location for the heat pump.
Procedure for setting the manual valve to control external circuit flow.
Graph for adjusting the manual valve based on water temperatures.
Preliminary steps required before adjusting the manual valve.
Step-by-step guide for adjusting the manual valve.
Overview of the microprocessor-based control system.
Explanation of the control panel buttons and display indicators.
How to define and adjust controller functions and parameters.
Instructions for configuring user-specific operational parameters.
Instructions for configuring factory-defined operational parameters.
Procedure to restore factory default settings for parameters.
Configuration of various sensors and their types for the heat pump.
Setting of temperature setpoints and differentials for heating and cooling.
Operating limits and factory adjustment values for well/ground water operation.
Configuration of heating and cooling temperature setpoints and differentials.
Parameters controlling compressor start-up and operation.
Configuration and management of various fault conditions.
