To Next PageTo Next Page
Need help?Do you have a question about the CIAT AUREA 40 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | AUREA 40 |
| Heating Capacity | 40 kW |
| Cooling Capacity | 40 kW |
| Refrigerant | R410A |
Advice to avoid accidents during installation, commissioning, and adjustment operations.
Compliance with EN 60204-1, machine directives, and local wiring regulations.
Accessing and modifying user-specific parameters, protected by a password.
Accessing and modifying factory-specific parameters, protected by a different password.
Parameters related to compressor operation, including time limits and maintenance settings.
Configuration of antifreeze setpoints and differentials for the internal exchanger.
Critical parameters for compressor operation like minimum run time, stop time, and anti-short cycle time.
Configuration of frost protection for the external heat exchanger, including setpoints and faults.
Settings for internal heat exchanger antifreeze protection, including setpoints and faults.
Identifying and responding to high pressure faults, including compressor shutdown and display warnings.
Identifying and responding to low pressure faults, including compressor shutdown and display warnings.
Safety functions of low/high pressure switches, antifreeze sensors, and water flow switches.
Essential checks before commissioning the unit, ensuring safe and correct installation.
