Need help?Do you have a question about the CIAT µConnect and is the answer not in the manual?
Details the mounting and conditions for the control terminal, and its primary uses.
Lists the functions of the remote control, including mode selection and setpoint adjustment.
Describes how to set the current day and time on the remote control using the selector and buttons.
Explains the three operating modes: Comfort, Economy, and Weekly programming, and how to switch between them.
Details how to program the unit to switch between comfort and economy modes daily.
Explains how to activate or deactivate the programmed weekly schedule by pressing the OK button.
Covers how to identify and handle faults displayed on the control terminal, including fault codes.
Explains how to set the unit to frost protection mode for periods of absence.
Details how to check the system pressure and when to refill if necessary.
Specifies that hydraulic filters on the water return must be cleaned at least once a year.
Instructions on how to unseize valves by opening and closing them annually.
Guidance on operations at the end of the heating season, including setting the dial to off mode.
To Next Page
General