Need help?Do you have a question about the Cino A660BT Series and is the answer not in the manual?
Instructions for installing the battery pack into the scanner.
Steps to charge the battery using a power supply unit and cradle.
Instructions for charging the battery using a USB port.
Connects scanner to cradle for peer-to-peer connection.
Detailed steps for pairing the scanner with the cradle.
Steps to connect the smart cradle for PICO mode.
Procedure for pairing scanners in PICO mode.
Ensure battery is charged and scanner is in uninstall state.
Steps to discover and connect the scanner via Bluetooth.
Steps to establish an SPP Master connection.
Detailed procedure for SPP Master pairing.
Setting up a virtual COM port for SPP Slave.
Procedure for pairing the scanner in SPP Slave mode.
How to allow scanning when out of radio coverage.
Steps to enter inventory batch scanning mode.
How to exit batch scanning mode.
How to input quantity data alongside scanned barcodes.
Using the 'Transmit Stored Data' command.
Transferring data by placing the scanner on the cradle.
Command to remove the most recently scanned barcode.
Status of the scanner's link indicator lights.
Status of the scanner's status indicator lights.
Indicator lights and beeps for the HB2112 cradle.
Indicator lights and beeps for the HB2100 cradle.
General| Brand | Cino |
|---|---|
| Model | A660BT Series |
| Category | Barcode Reader |
| Language | English |
To Next Page